Length: 36
ft 0 in / 10.87 m
Beam: 15 ft 0in / 4.57 m
Draft: 2 ft 10 in / 0.86 m
Displacement: 9,250 lbs / 4,205 kg
CONSTRUCTION
Hull, deck and structural bulkheads manufactured of biaxial fiberglass with isophthalic/vinylester resins, and Nida Core (polypropylene honeycomb core), vacuum bagged for its light weight properties, stiffness and strength
Hull to deck fastened chemically and mechanically
Twin fiberglass molded keels, foam filled with integral sumps
Twin high-density foam/fiberglass balanced rudders
Five year limited structural/blister warranty
SAILS & SAIL HANDLING EQUIPMENT
Aluminum mast and boom
Tri-stay rig, stainless steel standing rigging
Full batten dacron mainsail with large roach, Strong sail track system, integral Boom Bag, lazy jacks
Self-tacking, full batten dacron jib with Camber Spar, topping lift, lazy jacks and jib cover
Main halyard, main sheet and one single line reef lead to self-tailing winch
Jib sheet, jib halyard and Boom Brake lead to self-tailing winch
Rigid boom vang
Sheet stoppers
Deck organizers
Winch handle
All lines lead to cockpit, color-coded running rigging
MECHANICAL, ELECTRICAL & PLUMBING
90 gal. water tank with gauge and filter
12 volt hot & cold water pressure system
60 gal. fuel tank with gauge
30 gal. holding tank with level indicator
(2) 210 amp house system Lifeline marine batteries
110 volt shore power system
Premier Plus A/C - D/C electrical panel
30 amp shore cord
40 amp Smart battery charger
Running lights, anchor lights, combo steaming and foredeck light
20 lb. aluminum propane tank in separate vented locker
Deck mounted fuel, water and holding tank access
Remote shut off for propane
Water heater-engine exchange/110 volt
12 volt interior lighting
(2) 12 volt automatic, (2) manual bilge pumps
Non-corrosive, fiberglass reinforced Marelon through hulls and seacocks
12 volt macerator for holding tank pump-out
DECK
Bulkhead mounted navigation helm station with hydraulic steering
Adjustable helm seat with foot rest
Emergency tiller
4” binnacle compass
(8) stainless steel opening ports with screens
(4) stainless steel opening hatches with screens
Stainless steel stanchions
Molded PVC rub rail
Bow corner rail seats
Bow and stern corner rails with lifelines
Double lifelines
Lifeline gates - port, starboard, forward, aft
Acrylic companionway door
Stainless steel anchor roller and cleat
Stainless steel bow, stern and amidships cleats
Self-draining foredeck storage lockers
Cockpit lazarette storage
Aft deck with stainless steel boarding ladder
Molded non-skid on all deck surfaces
Bimini/Dodger combo
INTERIOR
Large dinette folding table with locking extension
Three large staterooms with full-size berths, hanging lockers and drawer storage
Interior cushions covered with DuraTouch leather
(3) 4” medium density mattresses
Chart storage locker
Linen storage locker under settee
Teak and holly synthetic laminated flooring
Interior teak trim with oil finish
GALLEY
7.5 cubic ft. front loading side by side refrigerator/freezer
Two burner propane stove and oven
Double high polished stainless steel sink
Single control faucet with extendible spray nozzle
Custom Gibraltar countertops with bull-nose edge
Galley storage lockers and pantry
Access to port bilge
HEAD
Full separate stand-up fiberglass shower stall with macerator pump-out
Vanity with an oval Corian sink, custom Gibraltar countertops with bull-nose edge, mirror, storage shelves
Large medicine cabinet
Marine head with 12 volt macerator
Access to starboard bilge
ENGINES
Twin 27hp diesel engines with sail drives and folding propellers
(2) 90 amp engine cranking Lifeline marine batteries
(2) 55 amp alternators
Fuel filters
Engine room blowers
Battery disconnect switches
Engine battery parallel switch
PRICING
Base prices (including standard equipment) $209,000
staterooms salon galley head engines sail handling cockpit layout options EndeavourCat 36 Home